The NIVO® pedestal is very easy to install thanks to its rotating screw system. This system allows for the optimal adjustment of the height of the pedestal and a perfect adjustment of the level of the structure. The rotation of the ring on the jack varies the height according to the direction of rotation.
The installation of joists on NIVO® pedestals allows a much faster installation. In addition to saving time, the installation is simplified.
The maximum supported load for a NIVO® pedestal is 1000 kg. The pedestals are made from high quality materials to ensure high strength and structural stability. Whether for a private or public terrace (ERP), NIVO® pedestals are suitable for all types of projects and offer optimum safety.
NIVO® joist pedestal heads are suitable for fixing wooden joists. The L-shape angle allows the joists to be screwed on from the side in order to hold the joists effectively on the pedestal.
Screwing can also be done from above the joists and thus through the head of the pedestal.
Designed and developed by our wood engineers, the NIVO range of pedestals offers you a complete range of adjustable PVC pedestals specially designed for the installation of wooden decks on decking slabs (wood or concrete).
Adjustable from 25 to 240 mm in height, our pedestals are height-adjustable and ensure robustness and precision when mounting your terrace on slabs. The quality of the material used allows us to guarantee resistance to any type of environment: bad weather, UV rays, and remarkable stability over time, proof of the quality of our products.
The NIVO pedestals are calibrated and dimensioned for optimum quality. The base of the pedestal (Ø20cm = 314cm²) is wide enough to prevent the terrace from sinking into the ground. The diameter of the rotation screw is one of the widest on the market, to guarantee you the best possible stability.
In addition, each pedestal head is fitted with 4 tabs that can be used to hold any type of slab: wood, gravel, concrete, etc...
Thanks to its rotating screw system, the NIVO® pedestal is very easy to install. Adjustment of the level of the structure is made as easy as possible.
Indeed, NIVO has developed a range of pedestals especially designed for the installation of wooden decks on joists or of self-supporting concrete or wooden slatted slabs. Solid and resistant to a load of at least one tonne, our pedestals are adjustable in height and easy to install. NIVO pedestals are adjustable in height from 40 to 60mm. And to complete the range of heights, a 6-centimetre extension can be inserted between the base and the support.
In addition, our pedestals are all compliant with D.T.U. 43 and 51-4. The admissible load per pedestal is therefore 1000 kg, weight to be respected according to the DTU (P.V. of compression tests on request).
NIVO pedestals must be laid on stabilised ground (waterproofing, concrete, sand, topsoil, etc.). To prevent weeds from growing under the structure, we strongly advise you to lay a geotextile felt .
NIVO pedestals allow self-supporting concrete or wooden slabs to be laid between the tabs. On average, 4 to pedestals per m2 are needed to create a stable and solid ground.
60mm extension for 140-230mm stud. Up to 5 extensions can be stacked on top of each other to reach a maximum height of 530mm while maintaining a stable footing.
The NIVO® Slope Corrector provides a slope correction from 2 to 5% in the simplest of ways.
The connection between the corrector and the base of the NIVO® deck is optimal, allowing the stability of your slab or joist deck to be maintained.